Hey everyone I have a USA grind and I’m looking for a neck for it
Now I’m aware peavey no longer manufactures USA instruments but. I could use your help if you have any ideas
Peavey USA grind neck!
-
- Member
- Posts: 325
- Joined: Wed May 28, 2014 6:05 pm
- Location: Scotland
Re: Peavey USA grind neck!
@BQUAD5
You need to search outside the USA.
In 2001 Peavey released the "Dynabass International series" , commonly referred to as just the "International". This was a passive bass bearing no similarity of the original Dynabass.
The bit which is of interest to you is the neck. The 24 fret International neck has the same profile , dimensions and slanted neck pocket as the bolt on US Grind.
Don't mistake the Fury 4 for the International , might look the same but the Fury 4 has a different pocket.
This is what you are looking for.
You need to search outside the USA.
In 2001 Peavey released the "Dynabass International series" , commonly referred to as just the "International". This was a passive bass bearing no similarity of the original Dynabass.
The bit which is of interest to you is the neck. The 24 fret International neck has the same profile , dimensions and slanted neck pocket as the bolt on US Grind.
Don't mistake the Fury 4 for the International , might look the same but the Fury 4 has a different pocket.
This is what you are looking for.
Axcelerator,B-90,B-Quad,Cirrus,Dyna,Dyna/Unity,Foundations,Forum,Fury,Gbass,Grind,International,midibase,Milestone III, Millenniums,Patriot,Resolite,RJ-IV,Sarzo,3 T40,T45,T20,TL-5,Tragic,Unity,Void,Zephyr5,3 Zodiac.