case foam gunk
case foam gunk
what is best way to remove the deteriorated foam gunk from guitar that has been stored for long time?
-
- Member
- Posts: 329
- Joined: Wed May 28, 2014 6:05 pm
- Location: Scotland
Re: case foam gunk
I've heard folks recommend using naptha.
For pete's sake don't use acetone,it dissolves nail polish so WILL have an effect on the finish.
The same folks saying naptha recommend cutting yoga mats to re-line the case.
For pete's sake don't use acetone,it dissolves nail polish so WILL have an effect on the finish.
The same folks saying naptha recommend cutting yoga mats to re-line the case.
Axcelerator,B-90,B-Quad,Cirrus,Dyna,Dyna/Unity,Foundations,Forum,Fury,Gbass,Grind,International,midibase,Milestone III, Millenniums,Patriot,Resolite,RJ-IV,Sarzo,3 T40,T45,T20,TL-5,Tragic,Unity,Void,Zephyr5,3 Zodiac.
Re: case foam gunk
Will give it a try, thanx!
Re: case foam gunk
WD40 worked for me. Break the guitar down and soak any metal parts. Spray the body and let it sit ( dont flood the control cavities or neck pocket)
Scrape off the worst with a plastic scraper and then spray a rag and wipe the remaining residue off the body.
Scrape off the worst with a plastic scraper and then spray a rag and wipe the remaining residue off the body.
2- 87' Falcons, 90 Falcon Standard, 91 Falcon Custom,94 Axcelerator, 95 Firenza, Patriot, 83 Impact 2, 84 Horizon 2, Prowler, Wiggy, 2 X Classic 20,Classic 30 II, VK20MH(FieldKing!), 112SX cab, Transtube Pro 100 EFX, Transtube 258EFX