Recently acquired a T-30, but the action is too high. Bridge setup confuses me. I've adjusted the micro-tilt as much as I think I safely can, but the bridge/tailpiece?
There are two ways of lowering the bridge? 1)(top pic) The two small allen screws that are planar to the body on either side of the bridge? Hard to adjust because the bridge pickup is in the way.
And then 2) (second pic) the two larger holes on top of the bridge which have may have allen screws in them? What size? And they turn clockwise or counterclockwise to make the bridge flush with the body (third pic, bridge not flush with body)?
