At-200 piezo wiring locations

This forum is for talking about all kinds of Peavey electric and acoustic guitars.
Post Reply
Sen8
New Member
Posts: 6
Joined: Mon Sep 12, 2016 3:52 am

At-200 piezo wiring locations

Post by Sen8 » Fri Nov 12, 2021 2:19 pm

Hello,
I have this wonderful guitar, which i've replaced the bridge by an heavier one. Sadly, i worked on this 5years ago and let tje project sleeping, and need to solder back all thz piezo's. I've lost the connector attached to each piezo, and can't find who go where.
If anyone can measure and tell me how it is wired on DSP board, i would be really thankful.
Antares couldn't help me and Peavey never answered me.
Greetings,
Damien.

Sen8
New Member
Posts: 6
Joined: Mon Sep 12, 2016 3:52 am

Re: At-200 piezo wiring locations

Post by Sen8 » Tue Jan 18, 2022 2:30 pm

Up !

Sen8
New Member
Posts: 6
Joined: Mon Sep 12, 2016 3:52 am

Re: At-200 piezo wiring locations

Post by Sen8 » Fri Feb 18, 2022 9:10 am

So,
Even Antares or Peavey couldn't give me an answer, so i found it with some time, 5 Years after and thanks to Covid for allowing me some time. For the ones who will be confronted to this :
Sort all the piezo's with an AC multimeter, you'll have about 50mVac when string concerned vibrate.
Then, solder all the strings, locate the square lablelled '' 1'' on main board which is the white wire of piezo string 1,then the 2 is the ground wire of piezo string 1,and so on. There is a 13th contact which is the + of green led located on front pickup.
Happy to play the autotune again !

Post Reply