peavey pattiot plus question

This forum is for talking about all kinds of Peavey electric and acoustic guitars.
Post Reply
jethro
Member
Posts: 59
Joined: Sun Oct 18, 2009 10:12 pm

peavey pattiot plus question

Post by jethro » Wed Aug 31, 2022 11:02 am

I used to know this, but cannot recallnow.

What wood is used on the body of the Patriot Plus guitars? I have the redburst of this model. I tried finding the answer on the internet, but of course I have seen maple, ash and the manual just says "hardwood".

User avatar
JamesPaul
Member
Posts: 2476
Joined: Fri Sep 12, 2008 7:28 pm
Location: Hometown of THE GODZ & ROSIE

Re: peavey pattiot plus question

Post by JamesPaul » Mon Sep 05, 2022 12:26 pm

It is not uncommon to use Maple for transparent and figured finishes. The same guitars will use Ash for solid/opaque finishes.

But I am not a Peavey guitar guru, so we will wait for one to chime in.
Enzo wrote:I find if the amp is working, that is a good point to stop fixing it.
James Paul's Peaveys
Decade, Classics, Ecoustic, Windsors, VYPYR, Triple XXX, XXL, VKs, Bandit, JSXs, VIP, Piranha and a Penta.

User avatar
studiodtk5
Member
Posts: 2076
Joined: Sat Feb 20, 2010 1:39 pm
Location: Toledo, Ohio

Re: peavey pattiot plus question

Post by studiodtk5 » Sat Sep 17, 2022 6:40 pm

Post a photo. As Peavey has a habit of changing stuff up at will, best to see what you have.
Darren
ITOC: 08-00190

Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...

jethro
Member
Posts: 59
Joined: Sun Oct 18, 2009 10:12 pm

Re: peavey pattiot plus question

Post by jethro » Mon Sep 19, 2022 10:14 pm

Not mine, but same as mine as far as I can tell. Except this is Patriot an minis Patriot Plus
FullView_Angle.jpg
FullView_Angle.jpg (51.46 KiB) Viewed 42 times

Post Reply