kb 100 reassembling problem

This forum is for talking about Peavey keyboard amplifiers.
Post Reply
ironwine
New Member
Posts: 1
Joined: Sat Jun 26, 2021 3:23 pm

kb 100 reassembling problem

Post by ironwine » Sat Jun 26, 2021 3:31 pm

hello dear peavey people.
i opened up the kb 100 amp i got from a friend, just for general cleaning as i was never serviced for 30 years...
unfortunately i did not labeled the blue/yellow cable that goes from the output board tp the speaker. now i am not sure where the blue goes and where the yellow, don't want to make any damage...

i was not able to find an answer from the schemes....

is there any kb100 owner here who can help?

cheers
Attachments
20210626_225559.jpg
20210626_225559.jpg (3.76 MiB) Viewed 3428 times
20210626_225641.jpg
20210626_225641.jpg (4.14 MiB) Viewed 3428 times

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: kb 100 reassembling problem

Post by Enzo » Mon Jun 28, 2021 9:31 pm

Plug it onto the little board next to the other yellow and blue wires, with the wires on the same sides. So both yellows on the left and both blues on the right, as we look at the photo

Post Reply