hello dear peavey people.
i opened up the kb 100 amp i got from a friend, just for general cleaning as i was never serviced for 30 years...
unfortunately i did not labeled the blue/yellow cable that goes from the output board tp the speaker. now i am not sure where the blue goes and where the yellow, don't want to make any damage...
i was not able to find an answer from the schemes....
is there any kb100 owner here who can help?
cheers
kb 100 reassembling problem
kb 100 reassembling problem
- Attachments
-
- 20210626_225559.jpg (3.76 MiB) Viewed 3479 times
-
- 20210626_225641.jpg (4.14 MiB) Viewed 3479 times
Re: kb 100 reassembling problem
Plug it onto the little board next to the other yellow and blue wires, with the wires on the same sides. So both yellows on the left and both blues on the right, as we look at the photo