KB-300 overheats

This forum is for talking about Peavey keyboard amplifiers.
Post Reply
Paul Perkins
New Member
Posts: 1
Joined: Sat Mar 14, 2020 5:43 pm

KB-300 overheats

Post by Paul Perkins » Sat Mar 14, 2020 6:01 pm

My KB-300 just started acting up, very low volume, seems like no volume unless turning up the reverb knobs, then after a short time of attempting to play my keyboard through it, it overheats and shuts down. The back of the panel gets really hot, and I pulled the amp out to look for anything obvious, nothing visably wrong, but some discoloration of metal where the 4 metal devices are mounted, and seems like maybe heat radiating more from one of those 4 more than the others. Appreciate any help. I know how to use an ohm meter and a soldering gun, but otherwise electronically illiterate.

User avatar
Posts: 9118
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: KB-300 overheats

Post by Enzo » Thu Apr 02, 2020 5:30 pm

Check the speaker, is it bound up?

Overheating usually means trouble in the output stages, could be simply bias related but could be other issues.

I really suggest taking it to a competent amp tech.

Post Reply