Reverb on KB4 Mic

This forum is for talking about Peavey keyboard amplifiers.
Post Reply
JDennis
New Member
Posts: 1
Joined: Wed Nov 24, 2021 5:20 am

Reverb on KB4 Mic

Post by JDennis » Wed Nov 24, 2021 5:33 am

Hi. I play the saxophone and would like to use my KB4 as my portable PA system. I thinking me and my keyboard player will just share the KB4, me plugging in a mic for a minimalist setup especially on small gigs. My question is, how do I put reverb/effects on the mic? I know there is an Effects Send/Return input but what kind of device can I use? Is there a stand alone reverb box I can plug in between the mic and the KB4, or should it be via the EFX send/return? Any suggestions?

TIA

User avatar
Enzo
Member
Posts: 9272
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Reverb on KB4 Mic

Post by Enzo » Wed Nov 24, 2021 4:14 pm

Mic channel is input #3. On the jack panel there is a send and return jack for that channel alone. Connect an effects unit there. There are many. Look through the offerings at your local store or online source you like. Effects units will cover reverb and delay and other things like chorus. You can also find plain old reverb and delay units.

Post Reply