Hi volks,
I have a question regarding the PEAVEY 410 TVX EX.
On the crossover network (type 30501150) is a 1/4" phone jack as audio input. I tried to figure out, what type it is. I'm absolutely sure, it's Amphenol.
My problem is the only fitting variant is ACJS-MN-3S. But it unfortunately is not the correct type, as the named version has two pickups in the socket for stereo phone jacks but the used connector has two pickups for a mono jack in the socket. And that one is nowhere to find.
So can someone please have a look into the technical documentation what type of socket is used on the schematic?
Thank you very much!
Broken 1/4" phone jack in PEAVEY 410 TVX EX - What's the manufracturer?
-
- New Member
- Posts: 1
- Joined: Sun Apr 24, 2022 11:47 am
-
- Member
- Posts: 675
- Joined: Fri Sep 12, 2008 6:03 pm
- Location: Southwestern CT
- Contact:
Re: Broken 1/4" phone jack in PEAVEY 410 TVX EX - What's the manufracturer?
Picture? I have the same cab, but if its the one Im thinking, it can be sourced.
Pro Audio 16FX2, PV6USB, 2xQF131, QF215, 2x SP2, 2xSP118, 2xPV1600, PV3800, 4xKPC15MP
Bass - Grind 6 NTB 410TVX, 115BVX, MAX700, 210TVX, MiniMega, VB-2, VB-3, VB-MA
Bass - Grind 6 NTB 410TVX, 115BVX, MAX700, 210TVX, MiniMega, VB-2, VB-3, VB-MA
Re: Broken 1/4" phone jack in PEAVEY 410 TVX EX - What's the manufracturer?
Is it the black square type with the one corner cut at an angle? Peavey had special jacks made for speakers. Plain old 1/4" jacks don't have a large tip contact area, but speakers need higher current capacity. SO they had jacks with two tip contacts instead of one (And clearly different from TRS) to double the tip contact surface. Peavey parts should have them, or other suppliers like Full COmpass.
Like this:
https://www.tubesandmore.com/products/1 ... -insulated
Like this:
https://www.tubesandmore.com/products/1 ... -insulated