Can I use two 8ohm speaker cabinets ? If I can how should I connect them to the amp so it doesn't damage the amp ?
Or should I use two 4ohm speaker cabinets instead ?
Or use just one 8 ohm cab or just ude one 4 ohm cab?
Mini mega amp speaker ohms
-
- Member
- Posts: 674
- Joined: Fri Sep 12, 2008 6:03 pm
- Location: Southwestern CT
- Contact:
Re: Mini mega amp speaker ohms
My video below should help.
Two 8 ohm cabs are a 4 ohm load to the amp in PARALLEL. Plug each cab into the MM, all good.
If you connect two 4 ohm cabs directly to the MM, thats a 2 ohm and it will not work. However....
***Two 4 ohm cabs you need to build a breakout box to run the cabs in SERIES so the amp sees an 8 ohm load.
DO NOT mix a 4 ohm and 8 ohm cab. Same issue as above but at a 2.77ohm load, leading to possible amp damage. The 4 ohm would see 2/3 of the wattage and the 8 ohm 1/3 of the power. Too much stress on the amp.
Hope this info helps!!
https://youtu.be/loA3lp0vDu8
Two 8 ohm cabs are a 4 ohm load to the amp in PARALLEL. Plug each cab into the MM, all good.
If you connect two 4 ohm cabs directly to the MM, thats a 2 ohm and it will not work. However....
***Two 4 ohm cabs you need to build a breakout box to run the cabs in SERIES so the amp sees an 8 ohm load.
DO NOT mix a 4 ohm and 8 ohm cab. Same issue as above but at a 2.77ohm load, leading to possible amp damage. The 4 ohm would see 2/3 of the wattage and the 8 ohm 1/3 of the power. Too much stress on the amp.
Hope this info helps!!
https://youtu.be/loA3lp0vDu8
Pro Audio 16FX2, PV6USB, 2xQF131, QF215, 2x SP2, 2xSP118, 2xPV1600, PV3800, 4xKPC15MP
Bass - Grind 6 NTB 410TVX, 115BVX, MAX700, 210TVX, MiniMega, VB-2, VB-3, VB-MA
Bass - Grind 6 NTB 410TVX, 115BVX, MAX700, 210TVX, MiniMega, VB-2, VB-3, VB-MA