Max 115 trouble!

This forum is for discussions on all kinds of Peavey bass amplifiers.
Post Reply
Steve987
New Member
Posts: 1
Joined: Sat Sep 05, 2020 4:49 am

Max 115 trouble!

Post by Steve987 » Sat Sep 05, 2020 5:04 am

Hi guys,
my Max 115 stopped working yesterday, there was no sound coming from the speaker.

The problem is one of the two inductors on the electrical board, just before woofer output.

Anyone can tell me the electrical data of this component?

Thanks!!!
Attachments
IMG-20200904-WA0002.jpeg
IMG-20200904-WA0002.jpeg (770.17 KiB) Viewed 5387 times
20200904_131011.jpg
20200904_131011.jpg (2.63 MiB) Viewed 5387 times

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Max 115 trouble!

Post by Enzo » Wed Sep 09, 2020 12:57 pm

I have a MAX115 schematic but it doesn't match your board. SO contact customer service at Peavey and ask for the schematics for your amp. Get the exact model name from the serial number tag, and the serial number, so they can identify your model version.

The part will be identified in the parts list, and should be available right from Peavey parts department

Nmercorella
New Member
Posts: 2
Joined: Fri Aug 13, 2021 5:46 pm

Re: Max 115 trouble!

Post by Nmercorella » Sat Aug 14, 2021 12:53 pm

I have the exact same problem. Did you ever get it resolved? I found the correct schematic and have bombarded Peavey with emails looking for parts.

Post Reply