Mini Mega effects loop.

This forum is for discussions on all kinds of Peavey bass amplifiers.
Post Reply
TheMurf
New Member
Posts: 2
Joined: Sun Apr 19, 2020 7:33 am

Mini Mega effects loop.

Post by TheMurf » Sun Apr 19, 2020 7:42 am

Tried to use effects loop instead of running straight into amp.
When effects loop is activated i am getting a distorted signal.
To get rid of this, you have to turn the gain virtually off but this massively reduces the volume.
Anyone else had effects loop issues?

LasseOnBass
New Member
Posts: 4
Joined: Thu Apr 16, 2020 6:13 am
Location: Berlin

Re: Mini Mega effects loop.

Post by LasseOnBass » Tue Apr 28, 2020 1:27 pm

Hi Murf, actually intended to to do the same.
So what are you using in front of the effects return, preamps, booosters? Couldcit be that their output is to hot?

TheMurf
New Member
Posts: 2
Joined: Sun Apr 19, 2020 7:33 am

Re: Mini Mega effects loop.

Post by TheMurf » Thu Jun 11, 2020 10:25 am

After a bit of trial and error, seem to have narrowed it down to my Sandberg bass.
When running the bass in passive mode the problem goes. Its only when its active
that distortion occurs.

Post Reply