MiniMax Standby Button failed

This forum is for discussions on all kinds of Peavey bass amplifiers.
Post Reply
gLight
New Member
Posts: 4
Joined: Mon Oct 06, 2014 1:35 pm

MiniMax Standby Button failed

Post by gLight » Sat Jan 08, 2022 7:55 pm

I've had a MiniMax over 5 years now and it has been a great amp. Until last night. Fired it up at a gig and the standby/tuner button was stuck in (in standby mode). It wouldn't disengage so I couldn't use the amp :( . Luckily had another amp to use so the night was ok.

Today I got it apart. The standby button has no numbers on it. The circuit board has Peavey MINI MAX PREAMP P15M304406. Did a Google search and came up with nothing.

As old as it is and as cheap as a new one is I'm reluctant to pay someone to fix it but could do the job if I could get the part. Any help appreciated.

User avatar
Enzo
Member
Posts: 9323
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: MiniMax Standby Button failed

Post by Enzo » Sun Jan 09, 2022 12:25 am

Oh, it is likely a common enough push switch. A photo would help. I don't have that schematic or I'd look up a part number.

Due to limitations at the factory, at least las I knew, Roger has suggested sourcing parts through Full Compass or similar place.

Post Reply