peavey bravo 112 reverb

[ozzyells@23]

i changed the speaker in my bravo . had it apart and dropped the amp. of the counter and to the floor [ no damage ] except .reverb wires seperated from the amp ... i still have enough wire to wire the reverb back together . there are 2 sets of wire coming off the reverb tank right and left sides . i know where one set goes do i just put both sets of wires together and wire them back to the amp. ? thanks

[tonepoet]

Not sure what you are describing. Every Bravo I've seen, the reverb wires have a plug that plugs into the bottom of the chassis. Try posting some photos of your problem.

tonepoet
www.jackshiner.com