valve king transformers

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
phillyhudson
New Member
Posts: 5
Joined: Fri Feb 03, 2023 6:45 am

valve king transformers

Post by phillyhudson » Mon Feb 06, 2023 4:24 am

hi all
I have mains and output transformers from 100W valve king that I'm using to build another amp - been looking at the schematic and need some confirmation from someone with more technical knowledge than myself please
IMG_4207.jpeg
IMG_4207.jpeg (2.15 MiB) Viewed 1663 times
I understand the heaters are DC rectified then the 6L6's wired in series and they're connected to the 12ax7's in parallel , so is the following [badly drawn] diagram correct ?
and does anyone know of a neat way of connecting the three 100uf capacitors between the 6L6's and ground ? - like can I wire them between pin 7 and pin 8 going to ground [via a 1R resistor] ?
thanks,
phil

Post Reply