I am helping a friend troubleshoot an issue with the Saturation tone quality in a Studio Pro 50. We have the schematic, but the board is not labeled. I do have an email in to Customer Service asking for the Layout Diagram, but I see from one of Roger's posts they still have limited staffing due to the pandemic situation.
Given the situation, I think Customer Service will have higher priorities, so I wanted ask if anyone has the Studio Pro 50 Board/Component Layout Diagram and will share it? You can email it to me if you do not want to post it.
In the interim we will start tracing our way through and I will capture the component locations we do identify.
Studio Pro 50 Board/Component Layout Diagram?
- JamesPaul
- Member
- Posts: 2477
- Joined: Fri Sep 12, 2008 7:28 pm
- Location: Moving Towards Adam Brown's State
Studio Pro 50 Board/Component Layout Diagram?
James Paul's PeaveysEnzo wrote:I find if the amp is working, that is a good point to stop fixing it.
Decade, Classics, Ecoustic, Windsors, VYPYR, Triple XXX, XXL, VKs, Bandit, JSXs, VIP, Piranha and a Penta.
Re: Studio Pro 50 Board/Component Layout Diagram?
Given good photographs of front and back of the PCB (by PM I guess), I can try to concoct something like the following:
Of course, without labelling, the utility is moderate at best, but at least it makes tracking things somewhat easier. In my case, I am still waiting for the schematic, so it's not like the labelling did a whole lot for me either.- JamesPaul
- Member
- Posts: 2477
- Joined: Fri Sep 12, 2008 7:28 pm
- Location: Moving Towards Adam Brown's State
Re: Studio Pro 50 Board/Component Layout Diagram?
Hey, thanks dak. I truly appreciate your offer. Fortunately I found someone who has it. One stop shopping with both the schematic and board layout in it.
I know Peavey is super busy as they still have not been able to get a copy to me. So I will go ahead and post it in case anyone else needs it.
I know Peavey is super busy as they still have not been able to get a copy to me. So I will go ahead and post it in case anyone else needs it.
James Paul's PeaveysEnzo wrote:I find if the amp is working, that is a good point to stop fixing it.
Decade, Classics, Ecoustic, Windsors, VYPYR, Triple XXX, XXL, VKs, Bandit, JSXs, VIP, Piranha and a Penta.
Re: Studio Pro 50 Board/Component Layout Diagram?
That amp is old enough that some of the electrolytic capacitors may be leaking. The small 2.2 uF are usually the 1st to go. The problem with old caps is that they may look fine buy they aren't.
The more I learn the more I realize how much I don't know.