Peavey Backstage 30 - on-off switch - UK

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
Douglas
New Member
Posts: 1
Joined: Thu Aug 11, 2022 4:47 am

Peavey Backstage 30 - on-off switch - UK

Post by Douglas » Thu Aug 11, 2022 4:56 am

Hello,

I’m looking to replace a switch that has gone faulty on an amp it is an on – off switch with four soldered prongs.

Written on the side of the switch is;

0321.0122
2A 250V AC-DC
4A 125V AC-DC
UND.LAB.INC.LIST

Can you suggest a replacement from anywhere in the UK please

Thanks

User avatar
JamesPaul
Member
Posts: 2477
Joined: Fri Sep 12, 2008 7:28 pm
Location: Moving Towards Adam Brown's State

Re: Peavey Backstage 30 - on-off switch - UK

Post by JamesPaul » Sun Sep 04, 2022 5:21 pm

I do not know about UK specific, but there is a place in Europe that Roger listed who may have it. See RS Components (Europe).

Need Parts?
Enzo wrote:I find if the amp is working, that is a good point to stop fixing it.
James Paul's Peaveys
Decade, Classics, Ecoustic, Windsors, VYPYR, Triple XXX, XXL, VKs, Bandit, JSXs, VIP, Piranha and a Penta.

User avatar
Pappy B
Member
Posts: 762
Joined: Sun Jan 31, 2016 2:30 pm

Re: Peavey Backstage 30 - on-off switch - UK

Post by Pappy B » Mon Sep 05, 2022 9:45 am

If that switch is not totally dead but just not working correctly try unplugging the amp and spraying some contact cleaner inside it and working it a few times. Might have to do it more than once.

If it has to be replaced that switch is nothing special. You already have the voltage and amp values, measure the hole its mounted in. Check with any shop that sells electronic parts. Vacuum Cleaner repair shops usually carry a variety of toggle and rocker switches.
The more I learn the more I realize how much I don't know.

Post Reply