Audition 110 Loose reverb tank
-
- New Member
- Posts: 2
- Joined: Tue Jan 11, 2022 7:49 am
Audition 110 Loose reverb tank
I recently bought a silver stripe audition 110, and when I took the board out to clean the pots I saw that the adhesive foam that held the spring reverb down had completely broken down and came loose from the chassis. Does anyone know of a suitable replacement for the old foam pad. I would imagine I would want something that allows the tank to vibrate independently of the chassis a little bit. https://drive.google.com/file/d/1aN0e-C ... sp=sharing
Re: Audition 110 Loose reverb tank
I would just put some double sided tape on each end until I decide there is a better way. It should hold it but can be removed if you change your mind.
The more I learn the more I realize how much I don't know.