Audition 110 Loose reverb tank

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
Chris Gray
New Member
Posts: 2
Joined: Tue Jan 11, 2022 7:49 am

Audition 110 Loose reverb tank

Post by Chris Gray » Wed Jul 06, 2022 9:06 am

I recently bought a silver stripe audition 110, and when I took the board out to clean the pots I saw that the adhesive foam that held the spring reverb down had completely broken down and came loose from the chassis. Does anyone know of a suitable replacement for the old foam pad. I would imagine I would want something that allows the tank to vibrate independently of the chassis a little bit. https://drive.google.com/file/d/1aN0e-C ... sp=sharing

User avatar
Pappy B
Member
Posts: 767
Joined: Sun Jan 31, 2016 2:30 pm

Re: Audition 110 Loose reverb tank

Post by Pappy B » Wed Jul 06, 2022 7:42 pm

I would just put some double sided tape on each end until I decide there is a better way. It should hold it but can be removed if you change your mind.
The more I learn the more I realize how much I don't know.

Post Reply