Valve King 100 - newb question

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
wohiqifi
New Member
Posts: 1
Joined: Tue May 24, 2022 10:41 pm

Valve King 100 - newb question

Post by wohiqifi » Tue May 24, 2022 11:07 pm

Hi all,
I have just bought a used Valve King 100 tube amp. I'm an absolute newby to tube amps.
However, all channels appear to be working great cracking tone and distortion, but I cant seem to get the effects loop to work Volume drops right down. When I try to play through my pedals and straight to the amp I still get nothing.
Any help would be greatly appreciated.
Porn pics are the ultimate way to get your fill of naughty pleasure - https://pornpics.love/categories/taboo/ and https://nudepics.site/top-rated/

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Valve King 100 - newb question

Post by Enzo » Wed May 25, 2022 7:06 pm

If you plug straight into the amp, and it works, then the amp is working. If you then plug into a pedal and then connect the pedal to the amp input, and get nothing, that pretty much says the pedal isn't working. And if the pedal doesn't work out front, it won't likely work in the FX loop either.

Post Reply