PEAVEY TRIPLE XXX FACEPLATE

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
IvanOoze
New Member
Posts: 2
Joined: Sat Jan 08, 2022 10:55 am

PEAVEY TRIPLE XXX FACEPLATE

Post by IvanOoze » Sat Jan 08, 2022 11:09 am

Hey everyone. I’m looking to change my triple xxx faceplate to a diamond faceplate with the peavey logo. I attached a picture to show you what I’m looking for. I tried emailing the person who made it but that was posted about 6 years ago so it’s safe to say that email he provided could be in-active. So if anyone on here that can help me out or can point me to the right direction that would be greatly appreciated!
Attachments
42E66090-EB63-4CDA-A586-4FAF08CDAB10.jpeg
42E66090-EB63-4CDA-A586-4FAF08CDAB10.jpeg (150.68 KiB) Viewed 1113 times

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: PEAVEY TRIPLE XXX FACEPLATE

Post by Enzo » Mon Jan 10, 2022 8:31 pm

SO measure your existing piece. Now take the dimensions to a local metals supplier and ask for a piece of diamond stock or whatever pattern you desire.

For example, here in Lansing we have places like this:

https://www.alro.com/locations/Location.aspx?loc=LZ

I have used them to source pattern plate, as well as stuff like expanded metal and perforated sheet. Ask your local steel suppliers if they do any retail sales. In fact, it is possible they might even have scrap pieces large enough for your application. Scrap usually sells for very little.

IvanOoze
New Member
Posts: 2
Joined: Sat Jan 08, 2022 10:55 am

Re: PEAVEY TRIPLE XXX FACEPLATE

Post by IvanOoze » Tue Jan 11, 2022 4:28 pm

Awesome. Thanks for your response. I believe there’s a alro up the road from me

Post Reply