PEAVEY TRIPLE XXX FACEPLATE
PEAVEY TRIPLE XXX FACEPLATE
Hey everyone. I’m looking to change my triple xxx faceplate to a diamond faceplate with the peavey logo. I attached a picture to show you what I’m looking for. I tried emailing the person who made it but that was posted about 6 years ago so it’s safe to say that email he provided could be in-active. So if anyone on here that can help me out or can point me to the right direction that would be greatly appreciated!
- Attachments
-
- 42E66090-EB63-4CDA-A586-4FAF08CDAB10.jpeg (150.68 KiB) Viewed 1266 times
Re: PEAVEY TRIPLE XXX FACEPLATE
SO measure your existing piece. Now take the dimensions to a local metals supplier and ask for a piece of diamond stock or whatever pattern you desire.
For example, here in Lansing we have places like this:
https://www.alro.com/locations/Location.aspx?loc=LZ
I have used them to source pattern plate, as well as stuff like expanded metal and perforated sheet. Ask your local steel suppliers if they do any retail sales. In fact, it is possible they might even have scrap pieces large enough for your application. Scrap usually sells for very little.
For example, here in Lansing we have places like this:
https://www.alro.com/locations/Location.aspx?loc=LZ
I have used them to source pattern plate, as well as stuff like expanded metal and perforated sheet. Ask your local steel suppliers if they do any retail sales. In fact, it is possible they might even have scrap pieces large enough for your application. Scrap usually sells for very little.
Re: PEAVEY TRIPLE XXX FACEPLATE
Awesome. Thanks for your response. I believe there’s a alro up the road from me