I'm trying to figure out if this amp is stock or was converted.
gotten lots of opinions but no one seems to know for sure. a Peavey rep I know thinks it's stock.
any ideas?
Session 500 head only?
Re: Session 500 head only?
Well, the key to me is the "BW Equipped" badge on the front. That means Black Widow speakers installed. Heads do not have speakers, so it could not possibly be BW Equipped. However, if it came with a companion cabinet that was BW equipped, I guess it makes sense.
I see you got the photos from Reverb? I found that picture, but also photos of the combo with a 15" speaker.
If it is a conversion, it is darn nice work.
I see you got the photos from Reverb? I found that picture, but also photos of the combo with a 15" speaker.
If it is a conversion, it is darn nice work.
Re: Session 500 head only?
Three things that I noticed are the black corner protectors, the grill cloth looks a little skewed at the top (like it has been altered) and, as Enzo pointed out, the BW Equipped badge.
is the grill removable from the front? If so, I'd say it's a good bet that this is a custom Job. A Darn good.
is the grill removable from the front? If so, I'd say it's a good bet that this is a custom Job. A Darn good.
The more I learn the more I realize how much I don't know.
- studiodtk5
- Member
- Posts: 2262
- Joined: Sat Feb 20, 2010 1:39 pm
- Location: Toledo, Ohio
Re: Session 500 head only?
Also, Peavey logo on front is wrong. It is not at the right angle. Peavey always places it on an up angle.
I think it’s custom job.
I think it’s custom job.
Darren
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...