Adapter cable for channel switching Peavey 6505 + on fxl8 pro looper with 2 1/4 Jack

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
Arne Lunde
New Member
Posts: 2
Joined: Tue Jul 13, 2021 4:00 am

Adapter cable for channel switching Peavey 6505 + on fxl8 pro looper with 2 1/4 Jack

Post by Arne Lunde » Tue Jul 13, 2021 4:17 am

I have Harley Benton fxl8 pro controller that I want to use for channel switching my Peavey 6505 + as well (with the loop always on) ... The fxl8 pro has 2 trigger input and I want to be able to switch my Peavey from clean / lead (on one trigger) and crunch on / off (on the other trigger) leaving the loop on always...
I am trying to make my own cable and need some schematics for this...
Need to know what the 7-pin goes....

Kind Regards
Arne Lunde

User avatar
Roger Crimm
Member
Posts: 963
Joined: Wed Sep 10, 2008 3:03 pm
Location: Meridian, MS USA
Contact:

Re: Adapter cable for channel switching Peavey 6505 + on fxl8 pro looper with 2 1/4 Jack

Post by Roger Crimm » Tue Jul 13, 2021 4:23 pm

See the FAQ sticky on this page....
Roger Crimm
Service Manager
[email protected]

Post Reply