valveking II 100 watt head schematic

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
Low__Tom
New Member
Posts: 3
Joined: Mon Mar 29, 2021 12:29 pm

valveking II 100 watt head schematic

Post by Low__Tom » Mon Mar 29, 2021 12:36 pm

hey ya'll, i'm looking for a schematic for the valveking ii 100 watt head. i found the one attached, but i'm not sure if its the i or ii, can anyone confirm, or provide the right one?
also, while i'm here, can anyone tell me of the channel switch delay mod or the jcm 800 mod also work for the valveking ii?
thank you!
sorry, forgot to add the attachment
Attachments
peavey_valveking_100_212.pdf
(301.41 KiB) Downloaded 17 times

rogue777
Member
Posts: 270
Joined: Mon Sep 14, 2009 7:07 pm

Re: valveking II 100 watt head schematic

Post by rogue777 » Tue Mar 30, 2021 7:07 pm

I only remember the Valveking 20W II and 50W II combos. There's a manual on the internet that shows the Valveking 100W II head, and also a mini head. I was wrong about that. Your schematic is for the I-One edition as you see it doesn't have the TSI Tube Status Indicators in the circuit which the II 2- version has. Didn't seem like production lasted too long before it was discontinued. I don't know about your mods.

rogue777
Member
Posts: 270
Joined: Mon Sep 14, 2009 7:07 pm

Re: valveking II 100 watt head schematic

Post by rogue777 » Tue Mar 30, 2021 10:40 pm

Do you own a Valveking 100W II head? That seems like a rare amp. I own the VK 50W II combo and I think it’s really made well. The TSI circuitry is some slick stuff which involves a resettable fuse in the cathodes of each output tube, nicely done. Peavey make some nice products which lead the pack, imo.

For all intent, you could figure the schematics for the VK 100W 1 and 2 are the same. The mods you have are probably written for the VKI and you have the 100W schematic. So if you understand which components are involved and have some idea how the mod works, then they should also would work on the VK II.

Low__Tom
New Member
Posts: 3
Joined: Mon Mar 29, 2021 12:29 pm

Re: valveking II 100 watt head schematic

Post by Low__Tom » Wed Mar 31, 2021 11:55 am

i do have the VK ii 100 watt head, had no idea it was a rare thing.
i have reached out to peavey tech support to see if the mod works for this amp. if they respond i'll post the response here.
i've also found the schematic for the valveking ii, which is attached in case anyone else comes looking for it.
Attachments
valveking2-100d.pdf
(122.98 KiB) Downloaded 26 times

Low__Tom
New Member
Posts: 3
Joined: Mon Mar 29, 2021 12:29 pm

Re: valveking II 100 watt head schematic

Post by Low__Tom » Mon Apr 05, 2021 1:02 pm

here is the response i got from peavey. i am also reaching out to local amp techs to see what they say. i'll post any new info here.

I am sorry for the delayed response to email from 04.01.2021, fighting my way through the 1,395 emails that are in my email. Thats kind of the reason I am answering it on 004.02.2021. Thats plus phone calls. So again, I do apologize.

I cannot say that this will work for the VKII 100 head. Two different beasts. Also, the VK112 that is mentioned in the thread was made between 2005 to 2008. I can tell by the serial number and I have no information on any mods done by us to this unit.

Also, I do not know anybody named Brian that worked in customer service or repair. I have been in customer service for 12 years and the company for going on 26 years now.

So, I am sorry, but I cannot tell you that this will work on your amp.


Peavey Customer Service

Chris G.

Post Reply