Peavey Forum

i also just got a vypyr pro and a sanpera pro - having a lot of fun with it but i can't figure out how to switch to the 3 different assignments for each of the expression pedals. I also can't figure out how to change the volume parameters on the default volume pedal (mine goes 75-100 percent... i w...

Landshark wrote: ↑

Fri Feb 07, 2020 8:28 am

Kevin Boudloche wrote: ↑

Thu Feb 06, 2020 10:36 am

If you find that it doesn't, please let us know.

i'm not buying a Chromebook until i know if it works.

anybody?

You can get a windows notebook for about the same price as a Chromebook. Which is what I use for vypyr edit.

The Sanpera is a pre programed controller that contains all the control codes (CC's) needed to work with your Amp. It's an addition to the amps DSP board. The ROM chip (eprom) in the sanpera could be faulty. Or The MIDI board in your amp could be faulty. Also check your midi cable for continuity wit...

I know the Vypyr VIP amps claim you can plugin a Bass guitar and it will automatically set "sensitivity" appropriately. Has anyone been using a Bass guitar with the Vypyr Pro? If so, what are the settings that might need to be adjusted? The VYPYR Pro has the Fender Baseman model ( BSMN ). Setting i...

Canaweb wrote: ↑

Sat Jan 04, 2020 11:20 pm

Is there a list of the factory presets?

The third topic in this form, ( Vypyr Tips/Tricks/FAQ- READ THIS FIRST )

I have a vypyr 30 and I was wondering if I can activate the tuner with a sanpera 1. I searched the forums and read the manual and couldn't find anything on this. Also, when using it in aux, I noticed the wah is "always on", that is to say, no true bypass. Is this intentional? You cannot activate th...

Do the presets work when you first turn on the amp (before you touch any dials(or stump dial))? If so the pots may be dirty. You can try cleaning them. You can try QD electronic cleaner or gunk-out for this. lay the amp on it's back, remove the knobs and spray straight down the shaft, turn the shaft...

Yes I did. in my case it was a loose connection in the chassis.

[
Post the question on Peavey's Facebook page. No one seems to check this forum any more.

When you change banks you must select a preset (1, 2, 3 or 4) within a few seconds or the amp returns to your last preset. Changing presets in the same bank should give no problem.

Use a mic preamp with the aux input.

I am wondering if I can buy just the Vypyr VIP-2 DSP board? I tried updating the firmware and now the amp will not work. I can hear the amp power up but no light show and no response of any kind. Love my amp and would love to hear any suggestions on what i should do. Thank you so much to all who ma...

usb777 wrote: ↑

Mon Jan 28, 2019 9:39 pm

Can you use multiple effects at one time on the Peavey Vypyr VIP-1 and if so how?
Mike Grimes

With a VIP 1 you can use one stump, one amp modal, delay and reverb together. Amp model is an considered an effect with modeling amps.

I have a VIP 2 amp with a Sanpera II pedal. When I record something using the looper, the recording plays back at like double the volume I recorded it at. Therefore, I cannot hear myself whenever I try to play over the looped recording. Is there a way to adjust the looper's recording volume? Or is ...

Looks like this VYPYR world died. If there's anyone left HAPPY NEW YEAR.