Most likely not the pedal, Read Sanpera 11 quit working by gsmacleod » Wed Nov 14, 2018 1:10 pm for things to check.
Search found 524 matches
- Mon Nov 19, 2018 8:01 pm
- Forum: Vypyr & Sanpera
- Topic: Vypr 30 sanpera 1 not working
- Replies: 4
- Views: 3453
- Fri Nov 16, 2018 6:48 pm
- Forum: Vypyr & Sanpera
- Topic: Sanpera II Quit Working
- Replies: 4
- Views: 2975
Re: Sanpera II Quit Working
I do not think there is any thing wrong with the Sanpera pedal. The power supply to the Sanpera11 may be out. Check the DSP and the MIDI board in the amp for a burn't component. This would wipe out the Sanpera power. A new midi board does not cost much but a new DSP board could cost more then the VY...
- Sat Nov 03, 2018 4:16 pm
- Forum: Vypyr & Sanpera
- Topic: Getting awful quiet here in Vypyrworld.
- Replies: 12
- Views: 7001
Re: Getting awful quiet here in Vypyrworld.
It seems like many of posters and readers in this form are leaving. There used to be 1000 or more views in each topic. now most new topics have 100 or less. I know that some of the older users because of age leave in time. I no longer see many names that I used to. Sad but I guess all good things re...
- Thu Oct 18, 2018 2:58 pm
- Forum: Vypyr & Sanpera
- Topic: Sanpera II floppy pedal
- Replies: 2
- Views: 2143
Re: Sanpera II floppy pedal
The pedal is held on with a large bolt and two nuts, Remove the locking nut then adjust the inner nut to the firmness you need. Replace the locking nut. If your pedal does not have an inner nut then just tighten the locking nut.
- Mon Oct 15, 2018 5:45 pm
- Forum: Vypyr & Sanpera
- Topic: Vypyr VIP 1 Feedback Issue
- Replies: 4
- Views: 3150
Re: Vypyr VIP 1 Feedback Issue
Feedback is caused by excess volume in relation to room size and or distance between guitar and amp. You have to adjust your volume and gain controls Accordingly. I have a small music room and found that I can use a red channel only on low volume. Also you can change the input value by turning the g...
- Wed Oct 03, 2018 8:21 pm
- Forum: Vypyr & Sanpera
- Topic: Tube 60 - static noise after hot humid storage.
- Replies: 7
- Views: 3665
Re: Tube 60 - static noise after hot humid storage.
Peavey will send you the schematic without any any hassle. Just call Customer Service and ask. Not having the amp in hand I won't guess at where the power circuit caps are. However, if you avoid the board I've circled in yellow you will likely survive. Just to clarify things, the two large capacito...
- Wed Sep 26, 2018 2:30 pm
- Forum: Vypyr & Sanpera
- Topic: VYPYR PRO input jack broken
- Replies: 3
- Views: 3078
Re: VYPYR PRO input jack broken
Is this an easy fix? Worth the hassle of sending it cross country to where i bought it online for some kind of warranty fix, or can i take it to any music repair place and just pay for them to fix it as it is cheap and easy? The input jack on the pro is a switching stereo jack mounted on a small bo...
- Tue Sep 11, 2018 4:18 pm
- Forum: Vypyr & Sanpera
- Topic: writing preset to amp not working
- Replies: 5
- Views: 4330
Re: writing preset to amp not working
After loading a preset, Select "write to amp", select a bank and click write. It says the preset was written to the amp. If your post describes how you write to amp then you forgot to select a preset. (1, 2, 3 or 4 ), Select a bank button and hold for 2 seconds repeat pressing bank button until you...
- Sat Sep 08, 2018 8:54 pm
- Forum: Vypyr & Sanpera
- Topic: Vypyr VIP-1 presets
- Replies: 2
- Views: 2681
Re: Vypyr VIP-1 presets
Try this site. Some of the presets are only for VIP 2 and 3. Lot of them work on VIP 1.
https://secure.peavey.com/vypyredit/
- Sun Aug 19, 2018 9:23 pm
- Forum: Vypyr & Sanpera
- Topic: Pro 100/Sanpera pedal
- Replies: 3
- Views: 2473
Re: Pro 100/Sanpera pedal
Quick question that I'm hoping someone can answer... I don't need the Sanpera Pro pedal board and I'm debating between the Sanpera 1 or 2 pedal. Really just want the looper and the ability to quickly switch between a couple of presets. The expression pedal would be a nice bonus, but not used much. ...
- Tue Aug 14, 2018 2:50 pm
- Forum: Vypyr & Sanpera
- Topic: Current Sanpera Compatibility with Vyprs (1st Gen)
- Replies: 1
- Views: 1678
Re: Current Sanpera Compatibility with Vyprs (1st Gen)
Yes, the new sanpera pedals will work. The older silver and the newer black ones are identical. The only difference is the buttons on the sanpera 1 is marked different.
- Mon Aug 13, 2018 3:10 pm
- Forum: Vypyr & Sanpera
- Topic: Vypyr VIP 2 dead after updating Firmware...
- Replies: 5
- Views: 3725
Re: Vypyr VIP 2 dead after updating Firmware...
I never posted this before because I do not want anyone to screw up their amp over something I said. Try running the original firmware blindly. Follow the instructions on the computer screen without looking at the amp lights, but give time for instruction to carry out, If this works then correctly u...
- Tue Jul 31, 2018 12:59 pm
- Forum: Vypyr & Sanpera
- Topic: sanpera 1 compatibility
- Replies: 2
- Views: 2452
Re: sanpera 1 compatibility
Is the sanpera 1 foot pedal compatible with the vypyr pro 100? I have a SANPERA 1, a SANPERA 2 and a FCB1010. I do not have any volume problems but my SANPERA 1 became a door stop because IMO it's just a oversize foot volume. The SANPERA 2 gives a lot of stump control plus volume and expression, bu...
- Fri Jul 27, 2018 5:31 pm
- Forum: Vypyr & Sanpera
- Topic: How does the "power sponge" work (Vypyr 100W 2x12")?
- Replies: 3
- Views: 3847
Re: How does the "power sponge" work (Vypyr 100W 2x12")?
How does the "power sponge" work? I can't hear no effect at all... I have a VYPYR 75. In the manual, it describes the power sponge as being able to “get that full-on cranked sound at bedroom levels”. The truth is my ears cannot head any difference no matter how I set it up. I have been told it only...
- Thu Jul 26, 2018 5:30 pm
- Forum: Vypyr & Sanpera
- Topic: Dead Vypyr 3
- Replies: 4
- Views: 2909
Re: Dead Vypyr 3
Installed firmware for the Vypyr 3 in a new computer. Now all I have on the screen is a single digit and 3 dots. Help please. Have I killed my friend? Could you elaborate a little more on what you did. Did you use firmware 1.62 and updater 3_01. 1.62 and 3_01 is the only upgrade software that will ...