Search found 123 matches
- Wed Mar 02, 2016 1:13 pm
- Forum: Mixers
- Topic: PV 14 USB - problem in recording
- Replies: 8
- Views: 4495
Re: PV 14 USB - problem in recording
Ah okay. The way I described it was for a Windows 7 and up computer, it looks like you're running Windows XP. That's probably not the problem anyway, usually when you install a generic audio device like the PV14 USB the default levels will be fine. Is there another computer you can try the mixer with?
- Mon Feb 29, 2016 11:54 am
- Forum: Mixers
- Topic: PV 14 USB - problem in recording
- Replies: 8
- Views: 4495
Re: PV 14 USB - problem in recording
Windows has a level control for both the input and output audio for your audio device. If you want to check the audio level going from your PC to the audio device, go to "Control Panel -> Sound -> Playback -> Speaker Properties -> Levels". Did you check the status of the button I mentioned in the pr...
- Mon Feb 29, 2016 11:20 am
- Forum: Mixers
- Topic: PV 14 USB - problem in recording
- Replies: 8
- Views: 4495
Re: PV 14 USB - problem in recording
Hi FogaSound, There is no specific driver to install for the PV14 USB mixer, it uses a generic audio driver that is already included in Windows. Your issue is probably not caused by any driver problems since your able to output audio successfully. Are you sure the "Tape/USB To Mix" button is pressed...
- Sat Feb 20, 2016 9:34 pm
- Forum: Mixers
- Topic: PV6 BT Bluetooth
- Replies: 2
- Views: 1861
Re: PV6 BT Bluetooth
The Bluetooth on the PV6-BT is a standard Bluetooth receiver for stereo audio, so anything that outputs Bluetooth audio (i.e. an iPod Touch, iPhone, Android, tablet, computer, etc.) can send it wirelessly to the mixer. It's convenient and you don't have to remember to bring a 3.5mm cable with you if...
- Thu Feb 18, 2016 8:25 am
- Forum: Mixers
- Topic: PV 6 USB - Recommendations for condenser mic
- Replies: 1
- Views: 1340
Re: PV 6 USB - Recommendations for condenser mic
Hi Renzr, There will usually not be any microphone recommendations in a mixer's user's manual because, as long as the mixer provides phantom power, all microphones will be compatible. I'm sure there will be some people on this forum willing to help you with condenser microphone recommendations, but ...
- Mon Feb 15, 2016 8:02 pm
- Forum: Mixers
- Topic: +48 v phantom power
- Replies: 3
- Views: 2529
Re: +48 v phantom power
No, it will not damage dynamic microphones. The only thing you need to worry about is ribbon microphones. Some will tell you not to apply phantom power to it.
- Mon Feb 08, 2016 10:30 am
- Forum: AA Signal Processors
- Topic: Digitool® MX16 GUI
- Replies: 1
- Views: 10275
Re: Digitool® MX16 GUI
Hi dror,
The current version of Digitool HD is compatible with Windows 10. If you can describe your issue in more detail I'd be happy to try and help you.
The current version of Digitool HD is compatible with Windows 10. If you can describe your issue in more detail I'd be happy to try and help you.
- Thu Feb 04, 2016 5:23 pm
- Forum: Mixers
- Topic: PV 14AT is SUPER quiet. Is it broken?
- Replies: 4
- Views: 2535
Re: PV 14AT is SUPER quiet. Is it broken?
Hi Will, were you able to figure this out?
- Sat Jan 30, 2016 10:50 am
- Forum: Mixers
- Topic: PV 14AT is SUPER quiet. Is it broken?
- Replies: 4
- Views: 2535
Re: PV 14AT is SUPER quiet. Is it broken?
What are you outputting your signal to? The PV14-AT is not a powered mixer, therefore its outputs need to go to powered speakers or a power amplifier that's connected to passive speakers. Are you maybe running the outputs straight to passive (unpowered) speakers? Can you listen through the headphone...
- Fri Jan 29, 2016 3:01 pm
- Forum: Mixers
- Topic: FX2 16 does not stay in USB Computer Mode
- Replies: 9
- Views: 4825
- Mon Jan 25, 2016 3:55 pm
- Forum: Mixers
- Topic: pv14at effects
- Replies: 4
- Views: 3147
Re: pv14at effects
No, it is just a basic single effects bus with one preset active at a time.
- Mon Jan 25, 2016 3:21 pm
- Forum: Mixers
- Topic: pv14at effects
- Replies: 4
- Views: 3147
Re: pv14at effects
There are 31 total presets which consist of 15 reverb presets, 8 delay presets, 3 vocal enhancer presets, and 5 chorus presets, each with 1 controllable parameter.
- Thu Jan 21, 2016 8:21 am
- Forum: Mixers
- Topic: PV14 Mixer backing tracks with click
- Replies: 3
- Views: 2260
Re: PV14 Mixer backing tracks with click
The A/B switch switches between which of the inputs goes to channel 13/14. If it's in the A position, the source for the channel is the 1/4" jacks. If it's in the B position, the source for the channel is the RCA jacks. And yes, it will only come out of the right speaker, but if that channel was pan...
- Thu Jan 21, 2016 8:09 am
- Forum: Mixers
- Topic: PV 10AT AUTOTUNE LCD DOESNT WORK
- Replies: 1
- Views: 1520
Re: PV 10AT AUTOTUNE LCD DOESNT WORK
That sounds like something is wrong with the LCD. Contact Peavey Customer Service, this should be covered under warranty.
- Wed Jan 20, 2016 8:33 am
- Forum: Mixers
- Topic: PV14 Mixer backing tracks with click
- Replies: 3
- Views: 2260
Re: PV14 Mixer backing tracks with click
Hi brawders, First, can I confirm that you are talking about the old PV14 mixer ? We just came out with a new PV14-AT mixer which would change the response to this question slightly. I'm going to assume you have the old PV14. Yes, you can definitely do what you need with this mixer. If you have an 1...