Search found 524 matches

by wmjones
Mon Nov 19, 2018 8:01 pm
Forum: Vypyr & Sanpera
Topic: Vypr 30 sanpera 1 not working
Replies: 4
Views: 2036

Re: Vypr 30 sanpera 1 not working

mjojo51 wrote:
Sun Nov 18, 2018 6:58 am
How can I tell if the problems in the sanpera or the amp. Beside buying and trying a new pedal. Thanks
Most likely not the pedal, Read Sanpera 11 quit working by gsmacleod » Wed Nov 14, 2018 1:10 pm for things to check.
by wmjones
Fri Nov 16, 2018 6:48 pm
Forum: Vypyr & Sanpera
Topic: Sanpera II Quit Working
Replies: 4
Views: 1566

Re: Sanpera II Quit Working

I do not think there is any thing wrong with the Sanpera pedal. The power supply to the Sanpera11 may be out. Check the DSP and the MIDI board in the amp for a burn't component. This would wipe out the Sanpera power. A new midi board does not cost much but a new DSP board could cost more then the VY...
by wmjones
Sat Nov 03, 2018 4:16 pm
Forum: Vypyr & Sanpera
Topic: Getting awful quiet here in Vypyrworld.
Replies: 12
Views: 3359

Re: Getting awful quiet here in Vypyrworld.

It seems like many of posters and readers in this form are leaving. There used to be 1000 or more views in each topic. now most new topics have 100 or less. I know that some of the older users because of age leave in time. I no longer see many names that I used to. Sad but I guess all good things re...
by wmjones
Thu Oct 18, 2018 2:58 pm
Forum: Vypyr & Sanpera
Topic: Sanpera II floppy pedal
Replies: 2
Views: 1192

Re: Sanpera II floppy pedal

The pedal is held on with a large bolt and two nuts, Remove the locking nut then adjust the inner nut to the firmness you need. Replace the locking nut. If your pedal does not have an inner nut then just tighten the locking nut.
by wmjones
Mon Oct 15, 2018 5:45 pm
Forum: Vypyr & Sanpera
Topic: Vypyr VIP 1 Feedback Issue
Replies: 4
Views: 1613

Re: Vypyr VIP 1 Feedback Issue

Feedback is caused by excess volume in relation to room size and or distance between guitar and amp. You have to adjust your volume and gain controls Accordingly. I have a small music room and found that I can use a red channel only on low volume. Also you can change the input value by turning the g...
by wmjones
Wed Oct 03, 2018 8:21 pm
Forum: Vypyr & Sanpera
Topic: Tube 60 - static noise after hot humid storage.
Replies: 7
Views: 1882

Re: Tube 60 - static noise after hot humid storage.

Peavey will send you the schematic without any any hassle. Just call Customer Service and ask. Not having the amp in hand I won't guess at where the power circuit caps are. However, if you avoid the board I've circled in yellow you will likely survive. Just to clarify things, the two large capacito...
by wmjones
Wed Sep 26, 2018 2:30 pm
Forum: Vypyr & Sanpera
Topic: VYPYR PRO input jack broken
Replies: 3
Views: 1500

Re: VYPYR PRO input jack broken

Is this an easy fix? Worth the hassle of sending it cross country to where i bought it online for some kind of warranty fix, or can i take it to any music repair place and just pay for them to fix it as it is cheap and easy? The input jack on the pro is a switching stereo jack mounted on a small bo...
by wmjones
Tue Sep 11, 2018 4:18 pm
Forum: Vypyr & Sanpera
Topic: writing preset to amp not working
Replies: 5
Views: 1994

Re: writing preset to amp not working

After loading a preset, Select "write to amp", select a bank and click write. It says the preset was written to the amp. If your post describes how you write to amp then you forgot to select a preset. (1, 2, 3 or 4 ), Select a bank button and hold for 2 seconds repeat pressing bank button until you...
by wmjones
Sat Sep 08, 2018 8:54 pm
Forum: Vypyr & Sanpera
Topic: Vypyr VIP-1 presets
Replies: 2
Views: 1562

Re: Vypyr VIP-1 presets

jiq1972 wrote:
Fri Feb 16, 2018 12:39 pm
Anyone know places where I can find presets for VIP-1? For instance, presets with classic rock band sounds?
Try this site. Some of the presets are only for VIP 2 and 3. Lot of them work on VIP 1.


https://secure.peavey.com/vypyredit/
by wmjones
Sun Aug 19, 2018 9:23 pm
Forum: Vypyr & Sanpera
Topic: Pro 100/Sanpera pedal
Replies: 3
Views: 1269

Re: Pro 100/Sanpera pedal

Quick question that I'm hoping someone can answer... I don't need the Sanpera Pro pedal board and I'm debating between the Sanpera 1 or 2 pedal. Really just want the looper and the ability to quickly switch between a couple of presets. The expression pedal would be a nice bonus, but not used much. ...
by wmjones
Tue Aug 14, 2018 2:50 pm
Forum: Vypyr & Sanpera
Topic: Current Sanpera Compatibility with Vyprs (1st Gen)
Replies: 1
Views: 822

Re: Current Sanpera Compatibility with Vyprs (1st Gen)

Yes, the new sanpera pedals will work. The older silver and the newer black ones are identical. The only difference is the buttons on the sanpera 1 is marked different.
by wmjones
Mon Aug 13, 2018 3:10 pm
Forum: Vypyr & Sanpera
Topic: Vypyr VIP 2 dead after updating Firmware...
Replies: 5
Views: 1801

Re: Vypyr VIP 2 dead after updating Firmware...

I never posted this before because I do not want anyone to screw up their amp over something I said. Try running the original firmware blindly. Follow the instructions on the computer screen without looking at the amp lights, but give time for instruction to carry out, If this works then correctly u...
by wmjones
Tue Jul 31, 2018 12:59 pm
Forum: Vypyr & Sanpera
Topic: sanpera 1 compatibility
Replies: 2
Views: 1051

Re: sanpera 1 compatibility

Is the sanpera 1 foot pedal compatible with the vypyr pro 100? I have a SANPERA 1, a SANPERA 2 and a FCB1010. I do not have any volume problems but my SANPERA 1 became a door stop because IMO it's just a oversize foot volume. The SANPERA 2 gives a lot of stump control plus volume and expression, bu...
by wmjones
Fri Jul 27, 2018 5:31 pm
Forum: Vypyr & Sanpera
Topic: How does the "power sponge" work (Vypyr 100W 2x12")?
Replies: 3
Views: 1439

Re: How does the "power sponge" work (Vypyr 100W 2x12")?

How does the "power sponge" work? I can't hear no effect at all... I have a VYPYR 75. In the manual, it describes the power sponge as being able to “get that full-on cranked sound at bedroom levels”. The truth is my ears cannot head any difference no matter how I set it up. I have been told it only...
by wmjones
Thu Jul 26, 2018 5:30 pm
Forum: Vypyr & Sanpera
Topic: Dead Vypyr 3
Replies: 4
Views: 1334

Re: Dead Vypyr 3

Installed firmware for the Vypyr 3 in a new computer. Now all I have on the screen is a single digit and 3 dots. Help please. Have I killed my friend? Could you elaborate a little more on what you did. Did you use firmware 1.62 and updater 3_01. 1.62 and 3_01 is the only upgrade software that will ...