Search found 3044 matches
- Fri Apr 27, 2018 5:45 am
- Forum: Speakers/Enclosures
- Topic: Mount an Elements 115C with VM70?
- Replies: 4
- Views: 2525
Re: Mount an Elements 115C with VM70?
I probably wouldn't. You're right at the edge of the weight limit of the brackets and I don't believe the VM70 and personally, I've found that the VM70 can sometimes be tough to keep in position if you're using it with heavier speakers. With the winds we have in my area, I can't imagine they'd hold ...
- Mon Apr 09, 2018 9:26 pm
- Forum: Speakers/Enclosures
- Topic: PV115 Crossover Fuse Needed asap
- Replies: 1
- Views: 1676
Re: PV115 Crossover Fuse Needed asap
Take it to your local auto parts store. They're 12v lightbulbs, that is, if they're the ones I think you're describing.
- Thu Mar 22, 2018 11:09 am
- Forum: Speakers/Enclosures
- Topic: Availability of impulse 1015 8 ojm
- Replies: 2
- Views: 1892
Re: Availability of impulse 1015 8 ojm
I just got off the line with Peavey. They are currently out of stock but are expecting the new production line to be here at the end of summer.
- Thu Mar 22, 2018 6:23 am
- Forum: Speakers/Enclosures
- Topic: Availability of impulse 1015 8 ojm
- Replies: 2
- Views: 1892
Re: Availability of impulse 1015 8 ojm
I think your dealer is giving you a runaround. I'm a dealer and I've never had the factory not respond to any phone call, even if the news is bad news. I can tell you that the Impulse line is being re-worked so there might not be any in stock as they change the model. I'll call this morning and see ...
- Fri Mar 16, 2018 1:52 pm
- Forum: Speakers/Enclosures
- Topic: Minimum power for PV115 speakers
- Replies: 2
- Views: 2155
Re: Minimum power for PV115 speakers
There really isn't much of a good answer. The minimum power to run these would probably be about 1/2 a watt. They'll be really, really, really quiet, but they'll run. :D For a usable minimum there are a few factors to consider, mainly how big of an audience you're playing to and what kind of music y...
- Thu Mar 08, 2018 9:46 am
- Forum: Mixers
- Topic: PV6 with Audacity
- Replies: 10
- Views: 5029
Re: PV6 with Audacity
Might be a stupid question, but do you have the USB RETURN MAIN button depressed? (Assuming you want to hear your USB playback through the MAIN outputs.
- Thu Mar 01, 2018 1:33 pm
- Forum: Power Amplifiers
- Topic: Using An IPR2 3000 to Power a Bass Amp
- Replies: 2
- Views: 2544
Re: Using An IPR2 3000 to Power a Bass Amp
I apologize in advance for this question since I'm 58 years old and have been playing bass since I was 14 (you'd think I'd know something by now).... I recently acquired a brand new Peavey IPR2 3000 to power a bass preamp. My bass cabs will be a 2 ohm load total (two 8 ohm Aguilar SL 112's and one ...
- Mon Feb 26, 2018 1:40 pm
- Forum: Speakers/Enclosures
- Topic: Upgrade to PV115 speakers
- Replies: 2
- Views: 2246
Re: Upgrade to PV115 speakers
It's most likely not the right parameters for that cabinet but more importantly, you won't really see any performance increase from it either. You're still stuck with the same crossover and high frequency driver.
- Sun Feb 18, 2018 6:34 am
- Forum: Speakers/Enclosures
- Topic: Versarray Pro system
- Replies: 21
- Views: 14415
Re: Versarray Pro system
I noticed a noise gate listed in the spec sheet. Can this be bypassed? Also can these be used as a single or double speaker on a stick setup? Thanks. Doug To really take advantage of the array effect, three tops per side is the minimum most manufacturers recommend. If your gig is small enough that ...
- Sat Feb 17, 2018 7:15 am
- Forum: Speakers/Enclosures
- Topic: Versarray Pro system
- Replies: 21
- Views: 14415
Re: Versarray Pro system
I noticed a noise gate listed in the spec sheet. Can this be bypassed? Also can these be used as a single or double speaker on a stick setup? Thanks. Doug To really take advantage of the array effect, three tops per side is the minimum most manufacturers recommend. If your gig is small enough that ...
- Tue Feb 13, 2018 8:03 am
- Forum: Speakers/Enclosures
- Topic: Versarray Pro system
- Replies: 21
- Views: 14415
Re: Versarray Pro system
We'll see, Don. They've just got so much catching up to do and there are so many others that have extremely established dominance in that market. Like the aforementioned iPad mixer, Peavey is behind other manufacturers on this by about a decade.
- Sun Feb 11, 2018 6:46 am
- Forum: Speakers/Enclosures
- Topic: Stacking SP2 over BW118 with speaker pole.
- Replies: 2
- Views: 2279
Re: Stacking SP2 over BW118 with speaker pole.
Take note: There are three (that I know of) designs of pole inserts on subwoofers. 1. Just a cup, much like what is on the bottom of most speakers. (The worst design.) 2. The pass-thru where the pole goes through a hole in the top of the sub and inserts into fitting on the bottom and inside the sub....
- Mon Feb 05, 2018 8:30 am
- Forum: Speakers/Enclosures
- Topic: Versarray Pro system
- Replies: 21
- Views: 14415
Re: Versarray Pro system
It will be interesting to see when it actually comes out. IIRC, their iPad mixer was shown about a year and a half ago and still isn't in production.
- Fri Feb 02, 2018 6:11 am
- Forum: Processors/Effects
- Topic: 231EQ creates hum
- Replies: 2
- Views: 3127
Re: 231EQ creates hum
Are you using all balanced cables?
- Wed Jan 31, 2018 5:55 am
- Forum: Speakers/Enclosures
- Topic: Look for schematic for Impulse 1012p power amp
- Replies: 1
- Views: 1603
Re: Look for schematic for Impulse 1012p power amp
Call Peavey parts/service and they'll send you a schematic.