Peavey Forum

Been a while guys. Hope everyone is well. Most likely by late March early April I will be offering up for sale the above aforementioned speakers.

Putting my feelers out there on this forum first to see if anyone is possibly interested.

What is the size of the memory stick? If it is too large, the VSX does not like that. I have several settings for numerous VSX's saved on a 128MB stick. I started running into the same issue with any stick larger than 256MB. The stick does not need to be large at all. The files for the VSX are small.

Item #00560100

The Thiel Small B/L parameters will change. It's the amount of flux B that are in the voice coil gap. If this is for a subwoofer the porting would change. Also, how will you be loading this speaker? That can also change the the impedance the amplifier actually sees. Take for instance the old FH1 bas...

No, it is not the same basket. The voice coils are composed of different material.

1508-8 CU CP Pro Rider baskets fit QW ML, QW MR, QW 4, QW 4F.
1508-8 AL CP Pro Rider baskets fit QW 3, QW 2, QW 2F, QW 3F, QW 215.

You may need to add a SA1 pole adaptor. Order them online. Just make sure you don't cut into any internal cross bracing and use something to really make the fitting airtight once in place. Subs. If center clustered, I prefer them to be on their sides. If deployed stage left/ stage right, I run them ...

I use an electric whench I got at Harbor Freight to lower and hoist up speakers and lighting fixtures. Works like a charm. 250# weight limit.

The measurement I took is for insertion into a cabinet that you have cut a hole into that needs the cup adapter.

1&7/8". I measured close to the base plate because the cups flange outward.

Give me a few minutes Travis and I'll measure one for you.

Cables can inductively pick up EMI from other cables. But I don't think what you did caused the amp(s) to go bad. It was something else.

If you must cross cables, cross at 90 degrees if possible.

I'll be using a pair of the 124's next month as a secondary aux fed sub system. The rest of the system is VR218's, Qw215's and Qw1's. IMHO, I don't think I'll need these subs with any of my systems, the summing effect of four VR218's will more than handle what the 124's put out in a pair for the ext...

If you're buying new, and really want to upgrade, just buy the QW2. Less transducers, but way better performance, and most likely more suited for your application. The SP6BX's are a quasi 4 way cabinet meant to be used as a stand alone full range speaker, not with subs. You can tri-amp this setup wi...

Doesn't matter. Just don't hang them backwards. Lol

My no sense, because I don't have 2 cents, is that I use the 8's for installs. Example: QW215 8 in to a 4 out to the QW1's 4 in. I even use the 8's on the VR218's. 8 in to the 4 out with a small jumper to the adjoining VR218's 4 in. I wouldn't want to lug around 8 conductor for mobile application. T...