When using the app, there are two places to adjust levels. There is the analog gain on the unit and there is digital gain that can be adjusted within the app.
And just to make everything sync'd up, are you turning App Mode on/off on the unit?
Search found 522 matches
- Tue Mar 19, 2024 4:47 pm
- Forum: Power Amplifiers
- Topic: LN 1263 Line Array Issues
- Replies: 2
- Views: 214
- Fri Feb 09, 2024 8:17 am
- Forum: Mixers
- Topic: PV6 BT Unresponsive
- Replies: 3
- Views: 1544
Re: PV6 BT Unresponsive
The PV6BT requires +15V DC.
The original (silver) PV6 and PV8 required 16VAC.
The original (silver) PV6 and PV8 required 16VAC.
- Fri Feb 02, 2024 9:21 am
- Forum: Mixers
- Topic: Recording from a PV16500
- Replies: 1
- Views: 628
Re: Recording from a PV16500
Yes, take the signal from the Record Out jacks. They are pre-master volume...so the master volume doesn't affect the level. However, you may need to adjust your balance between the channel levels and the master level. Think of it like this, the record out level is determined by the combination of th...
- Thu Jan 04, 2024 10:06 am
- Forum: Mixers
- Topic: DR16 mixer
- Replies: 10
- Views: 4431
- Tue Oct 24, 2023 10:31 am
- Forum: Mixers
- Topic: Aureus 28 presets
- Replies: 20
- Views: 8331
Re: Aureus 28 presets
Email Sent
- Thu Oct 12, 2023 9:39 am
- Forum: Mixers
- Topic: Aureus 28 presets
- Replies: 20
- Views: 8331
Re: Aureus 28 presets
Email Sent
- Wed Oct 11, 2023 4:35 pm
- Forum: Mixers
- Topic: XR1212 XLR Main Outs
- Replies: 2
- Views: 1132
Re: XR1212 XLR Main Outs
No...they are only cut from the amplifier outputs. If you look at the block diagram in the manual, you will see the DSP is after the analog mixer.
- Fri Sep 15, 2023 8:56 am
- Forum: Mixers
- Topic: Aureus 28 presets
- Replies: 20
- Views: 8331
Re: Aureus 28 presets
Email sent.
- Wed Sep 06, 2023 2:19 pm
- Forum: Power Amplifiers
- Topic: CS-800 1/4" outputs shorted from factory?
- Replies: 5
- Views: 2764
Re: CS-800 1/4" outputs shorted from factory?
That is a two tip 1/4" jack for higher current applications. The other pin is the switching pin...but it should have no connection to the ground pin.
It should also disconnect from the tip pins when a cable is plugged in.
It should also disconnect from the tip pins when a cable is plugged in.
- Mon Aug 28, 2023 3:13 pm
- Forum: Mixers
- Topic: Interchangable? "400 SC Module with DDT"
- Replies: 2
- Views: 1549
Re: Interchangable? "400 SC Module with DDT"
Going off of memory...no.
Some of them had bridged outputs, some had Speak-on outputs and some only had 1/4" outputs. I believe the output jack configuration was the main difference.
Some of them had bridged outputs, some had Speak-on outputs and some only had 1/4" outputs. I believe the output jack configuration was the main difference.
- Mon Aug 21, 2023 4:33 pm
- Forum: Mixers
- Topic: FX32 Security Password removal/reset
- Replies: 6
- Views: 4637
- Mon Aug 21, 2023 3:15 pm
- Forum: Mixers
- Topic: fx2 24 channel mixer password problem
- Replies: 2
- Views: 2149
Re: fx2 24 channel mixer password problem
Solved in an email.
- Fri Aug 18, 2023 3:19 pm
- Forum: Speakers/Enclosures
- Topic: Pvx p12dsp schematic or Q1 j72 identification
- Replies: 2
- Views: 1276
Re: Pvx p12dsp schematic or Q1 j72 identification
J72? I see 7N80C.
- Thu Jul 13, 2023 10:03 am
- Forum: Mixers
- Topic: Where to find lcd for 16/24/32?
- Replies: 4
- Views: 2220
Re: Where to find lcd for 16/24/32?
Parts Department To order replacement parts, please call us at (800) 752-7896 (toll free in the US). Our business hours are 8 a.m. - 5 p.m. Central Time, Monday-Friday. Hold times may be long during peak hours. If you have to wait on hold, feel free to leave a name and number and one of our Parts Sa...
- Tue Jun 06, 2023 9:21 am
- Forum: Mixers
- Topic: XR800F fader / slider knobs
- Replies: 3
- Views: 1341
Re: XR800F fader / slider knobs
Slider is p/n 31190123.
Fader Cap is 70902272.
I would call our parts department to confirm.
Fader Cap is 70902272.
I would call our parts department to confirm.