Search found 522 matches

by jim h
Tue Mar 19, 2024 4:47 pm
Forum: Power Amplifiers
Topic: LN 1263 Line Array Issues
Replies: 2
Views: 214

Re: LN 1263 Line Array Issues

When using the app, there are two places to adjust levels. There is the analog gain on the unit and there is digital gain that can be adjusted within the app.

And just to make everything sync'd up, are you turning App Mode on/off on the unit?
by jim h
Fri Feb 09, 2024 8:17 am
Forum: Mixers
Topic: PV6 BT Unresponsive
Replies: 3
Views: 1544

Re: PV6 BT Unresponsive

The PV6BT requires +15V DC.

The original (silver) PV6 and PV8 required 16VAC.
by jim h
Fri Feb 02, 2024 9:21 am
Forum: Mixers
Topic: Recording from a PV16500
Replies: 1
Views: 628

Re: Recording from a PV16500

Yes, take the signal from the Record Out jacks. They are pre-master volume...so the master volume doesn't affect the level. However, you may need to adjust your balance between the channel levels and the master level. Think of it like this, the record out level is determined by the combination of th...
by jim h
Thu Jan 04, 2024 10:06 am
Forum: Mixers
Topic: DR16 mixer
Replies: 10
Views: 4422

Re: DR16 mixer

You can download the app and the firmware on our website.

https://peavey.com/software/
by jim h
Tue Oct 24, 2023 10:31 am
Forum: Mixers
Topic: Aureus 28 presets
Replies: 20
Views: 8324

Re: Aureus 28 presets

Email Sent
by jim h
Thu Oct 12, 2023 9:39 am
Forum: Mixers
Topic: Aureus 28 presets
Replies: 20
Views: 8324

Re: Aureus 28 presets

Email Sent
by jim h
Wed Oct 11, 2023 4:35 pm
Forum: Mixers
Topic: XR1212 XLR Main Outs
Replies: 2
Views: 1132

Re: XR1212 XLR Main Outs

No...they are only cut from the amplifier outputs. If you look at the block diagram in the manual, you will see the DSP is after the analog mixer.
by jim h
Fri Sep 15, 2023 8:56 am
Forum: Mixers
Topic: Aureus 28 presets
Replies: 20
Views: 8324

Re: Aureus 28 presets

Email sent.
by jim h
Wed Sep 06, 2023 2:19 pm
Forum: Power Amplifiers
Topic: CS-800 1/4" outputs shorted from factory?
Replies: 5
Views: 2764

Re: CS-800 1/4" outputs shorted from factory?

That is a two tip 1/4" jack for higher current applications. The other pin is the switching pin...but it should have no connection to the ground pin.

It should also disconnect from the tip pins when a cable is plugged in.
by jim h
Mon Aug 28, 2023 3:13 pm
Forum: Mixers
Topic: Interchangable? "400 SC Module with DDT"
Replies: 2
Views: 1549

Re: Interchangable? "400 SC Module with DDT"

Going off of memory...no.

Some of them had bridged outputs, some had Speak-on outputs and some only had 1/4" outputs. I believe the output jack configuration was the main difference.
by jim h
Mon Aug 21, 2023 4:33 pm
Forum: Mixers
Topic: FX32 Security Password removal/reset
Replies: 6
Views: 4635

Re: FX32 Security Password removal/reset

Answered
by jim h
Mon Aug 21, 2023 3:15 pm
Forum: Mixers
Topic: fx2 24 channel mixer password problem
Replies: 2
Views: 2149

Re: fx2 24 channel mixer password problem

Solved in an email.
by jim h
Thu Jul 13, 2023 10:03 am
Forum: Mixers
Topic: Where to find lcd for 16/24/32?
Replies: 4
Views: 2219

Re: Where to find lcd for 16/24/32?

Parts Department To order replacement parts, please call us at (800) 752-7896 (toll free in the US). Our business hours are 8 a.m. - 5 p.m. Central Time, Monday-Friday. Hold times may be long during peak hours. If you have to wait on hold, feel free to leave a name and number and one of our Parts Sa...
by jim h
Tue Jun 06, 2023 9:21 am
Forum: Mixers
Topic: XR800F fader / slider knobs
Replies: 3
Views: 1334

Re: XR800F fader / slider knobs

Slider is p/n 31190123.

Fader Cap is 70902272.

I would call our parts department to confirm.