Search found 1796 matches

by JamesPaul
Thu Sep 29, 2022 3:26 pm
Forum: Club Peavey
Topic: Enzo
Replies: 32
Views: 21004

Re: Enzo

JamesPaul wrote:
Wed Sep 07, 2022 6:11 pm
Thanks Roger :!:
Crashed out my Mountain Bike relatively bad, but the Doc. says I CAN DRIVE SO, i'm stillplanningmg on making the drive from Cowtown. Let me know of you need a lift.
by JamesPaul
Thu Sep 29, 2022 8:32 am
Forum: Guitar Amplifiers
Topic: Peavey XXX 120W channel switch over a looper
Replies: 1
Views: 817

Re: Peavey XXX 120W channel switch over a looper

Welcome to the forum. I am not aware of any such device or cable. I am confident you will have to set the knobs on the Clean, Crunch, and Ultra channels and those 3 "presets" are all you will get from a tone perspective. The footswitch is only switching relays inside the amp. If you want more than 3...
by JamesPaul
Thu Sep 29, 2022 1:37 am
Forum: Guitar Amplifiers
Topic: Studio Pro 50 Board/Component Layout Diagram?
Replies: 3
Views: 1259

Re: Studio Pro 50 Board/Component Layout Diagram?

Hey, thanks dak. I truly appreciate your offer. Fortunately I found someone who has it. One stop shopping with both the schematic and board layout in it. I know Peavey is super busy as they still have not been able to get a copy to me. So I will go ahead and post it in case anyone else needs it. STU...
by JamesPaul
Sat Sep 17, 2022 8:43 pm
Forum: Guitar Amplifiers
Topic: Bandit 112 speaker simulated output
Replies: 9
Views: 3299

Re: Bandit 112 speaker simulated output

Kdudek wrote:
Sat Sep 17, 2022 6:03 pm
Yes that is the one I have. Let me know what you find out.
I will give it a go tomorrow and report back.
by JamesPaul
Sat Sep 17, 2022 1:21 pm
Forum: Guitar Amplifiers
Topic: Studio Pro 50 Board/Component Layout Diagram?
Replies: 3
Views: 1259

Studio Pro 50 Board/Component Layout Diagram?

I am helping a friend troubleshoot an issue with the Saturation tone quality in a Studio Pro 50. We have the schematic, but the board is not labeled. I do have an email in to Customer Service asking for the Layout Diagram, but I see from one of Roger's posts they still have limited staffing due to t...
by JamesPaul
Sat Sep 17, 2022 12:04 am
Forum: Guitar Amplifiers
Topic: Neutral to ground bypass capacitor
Replies: 4
Views: 1437

Re: Neutral to ground bypass capacitor

Thank you for the warm welcome! I appreciate the time you took to respond. The recap kit that I ordered supposedly includes replacement caps to correct the safety risk involving the X type cap connecting neutral to ground. I attempted to ask the seller about what type of caps the replacements were,...
by JamesPaul
Fri Sep 16, 2022 3:50 am
Forum: Guitar Amplifiers
Topic: Neutral to ground bypass capacitor
Replies: 4
Views: 1437

Re: Neutral to ground bypass capacitor

Welcome to the forum. This is not my area of expertise, but I will share what theory I remember. Capacitors on the mains lines are used for EMI and RFI filtering. The issue is if these capicitors should fail there could be an electrical shock hazard in the device being powered. Safety capacitors wer...
by JamesPaul
Wed Sep 14, 2022 9:12 pm
Forum: Speakers/Enclosures
Topic: Blue Marvel 10” speakers
Replies: 2
Views: 2575

Re: Blue Marvel 10” speakers

I too am looking for advice. I’ve played a 410E Cabinet with a Classic 100 head for decades. Just got the rig out of storage and all 4 cones are torn. I’m having trouble finding Blue Marvels to begin with never mind finding what can be a suitable replacement. I’m assuming all four cones would be ra...
by JamesPaul
Tue Sep 13, 2022 11:36 pm
Forum: Guitar Amplifiers
Topic: classic 20 channel 2 not working right
Replies: 8
Views: 1963

Re: classic 20 channel 2 not working right

Both lights stays green I even changed preamp tubes it still does it Does Channel 1 still operate normally after Channel 2 has failed? If you did not start with this, it is a good first step to take a 1/4" plug, spray some Deoxit on it, and plug/unplug it a few times in every jack on the amplifier....
by JamesPaul
Tue Sep 13, 2022 6:53 pm
Forum: Guitar Amplifiers
Topic: classic 20 channel 2 not working right
Replies: 8
Views: 1963

Re: classic 20 channel 2 not working right

Welcome to the forum. Do the TSI lights stay green, indicating no concerning issues with the power tubes? After Channel 2 fails, does Channel 1 still operate normally? I am not sure if I have a schematic for the Classic 20MH. Let me check and I may have a suggestion(s). Both lights stays green I ev...
by JamesPaul
Tue Sep 13, 2022 6:35 pm
Forum: Mixers
Topic: Replacement knobs for Peavy PV-at14 mixer
Replies: 1
Views: 1329

Re: Replacement knobs for Peavy PV-at14 mixer

You can try Peavey Parts. https://peavey.com/c/Contact-Us " Parts Department To order replacement parts, please call us at (800) 752-7896 (toll free in the US). Our business hours are 8 a.m. - 5 p.m. Central Time, Monday-Friday. Hold times may be long during peak hours. If you have to wait on hold, ...
by JamesPaul
Tue Sep 13, 2022 10:08 am
Forum: Guitar Amplifiers
Topic: Backstage Chorus 208
Replies: 1
Views: 1015

Re: Backstage Chorus 208

I do not own one, but there are Members here who do. They should be stopping by. If you do not already have the Operating Guide, it is available here. https://assets.peavey.com/literature/manuals/80301254.pdf It could be up to 28 years old, so you are on the right path to clean all the pots. You sho...
by JamesPaul
Tue Sep 13, 2022 12:28 am
Forum: Speakers/Enclosures
Topic: 1977 412S speaker cabinet
Replies: 3
Views: 2030

Re: 1977 412S speaker cabinet

... The serial number is 7E-053932 and what head they actually came with. ... Thank You It should be a 4 ohm cabinet, unless the wiring configuration or speakers have been changed. I have on old one, but the speakers and the grill have been changed. The 412S was often used with the Mace. Both with ...
by JamesPaul
Mon Sep 12, 2022 8:01 pm
Forum: Guitar Amplifiers
Topic: Peavey ED-100 Output Volume Cuts In Half
Replies: 8
Views: 3186

Re: Peavey ED-100 Output Volume Cuts In Half

Welcome to the forum. It could be any number of things causing the volume drop. I am not familiar with the ED-100. Someone who is should be along. In the interim, my usual first step for any odd volume or tone issues is to get a cable, spray some Deoxit on the plug, and then plug/unplug it a few tim...
by JamesPaul
Mon Sep 12, 2022 7:30 pm
Forum: Guitar Amplifiers
Topic: Proper operation of a VTM 120- Concerned about overheating
Replies: 1
Views: 2174

Re: Proper operation of a VTM 120- Concerned about overheating

Welcome to the forum. The VTM manual is available here. https://assets.peavey.com/literature/manuals/80300704.pdf I am not familiar with the Katana, but most Power Amp inputs are expecting a Preamp Output signal. That is a line level signal, likely 1V or less. I would expect that jack to feed into t...