Search found 768 matches

by colliedogboy1
Mon Sep 21, 2020 9:19 pm
Forum: Power Amplifiers
Topic: Peavey ipr 3000 amps
Replies: 1
Views: 3988

Re: Peavey ipr 3000 amps

Not sure what you mean by "link together". You would not want to link the two power amps to each other, so I assume you mean you want to connect the amps to the outputs of the mixer. Depending on what setup you want, there are several options open to you. You could connect one amp to your mixer's "M...
by colliedogboy1
Mon Aug 17, 2020 5:18 pm
Forum: Mixers
Topic: Peavy "AMR" MCR 4 cassette recording sustem
Replies: 4
Views: 4097

Re: Peavy "AMR" MCR 4 cassette recording sustem

I love to hear you guys spar. :)
by colliedogboy1
Thu Aug 06, 2020 10:27 pm
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 15138

Re: Building an Old School system based on DTH-1 and 415 Sub

Impressive work! Thanks for posting the pictures and details of what you're doing.
by colliedogboy1
Tue Aug 04, 2020 2:39 pm
Forum: Microphones
Topic: ProComm 2.4GHz Wireless--Lavalier
Replies: 2
Views: 8792

Re: ProComm 2.4GHz Wireless--Lavalier

I'm pretty sure the Peavey mic won't work with a Shure receiver, because each brand has its own set of frequencies. I tried to do that years ago for similar reasons as yours. As far as the mic only picking up the sound at 2 inches, I think the mic belt pac might have a "sensitivity" setting on it wh...
by colliedogboy1
Tue Jul 28, 2020 9:22 pm
Forum: Speakers/Enclosures
Topic: peavey 212 column speaker
Replies: 5
Views: 4119

Re: peavey 212 column speaker

Dookie, I right-clicked on his little image icons and selected "Load image in new tab" and the pics appeared in the new tab. Not our usual procedure.
Anyway, the head showed as a Peavey Supreme--looks like a guitar head to me. I am not sure what he intends to do with the 212s.
by colliedogboy1
Thu Jul 23, 2020 3:25 pm
Forum: Speakers/Enclosures
Topic: Asking about price 110HC
Replies: 3
Views: 3283

Re: Asking about price 110HC

Sorry, friend, but Dookie has it about right. You would do well to get even $40 for that speaker. It might serve okay for a small hall or a small gymnasium if you only wanted to use it to amplify voices. It is too small to broadcast music at any desirable level.
by colliedogboy1
Sun Jul 19, 2020 10:42 pm
Forum: Speakers/Enclosures
Topic: Speaker enclosures
Replies: 3
Views: 2940

Re: Speaker enclosures

I'm guessing that, since the KB-300 was given to you, it's probably an older model. It likely would make you a satisfactory monitor--certainly better than nothing at all. The Crate PA-6 appears to have a "Monitor Out" jack on the front. You can connect a 1/4" guitar cable to that jack and plug the o...
by colliedogboy1
Wed Jun 24, 2020 8:21 pm
Forum: Speakers/Enclosures
Topic: PV215D No Sound When Powered On
Replies: 1
Views: 2993

Re: PV215D No Sound When Powered On

Sounds like you are saying that the bottom woofer of one 215D cabinet does not work but the top woofer and the horn do work. The other 215D is perfectly good, right? If that is so, either the bottom woofer is burned out or the crossover output going to that bottom woofer is burned out. If you can, d...
by colliedogboy1
Thu Jun 18, 2020 9:16 pm
Forum: Power Amplifiers
Topic: my PV12 power amp
Replies: 2
Views: 3557

Re: my PV12 power amp

Whatever amp you have, it is apparently a stereo amp. So, yes, two 4ohm speakers into each side of a stereo amp will give you a 2ohm load into each side and a total of 2ohms load for the entire amp.
by colliedogboy1
Tue May 05, 2020 11:48 pm
Forum: Mixers
Topic: PV6 not recognized by computer
Replies: 1
Views: 2790

Re: PV6 not recognized by computer

You might find your answer if you do a search in the small white "Search..." slot inside the big blue bar at the top of this page. Type in some key words like "PV6 USB computer". You will find answers to other people who have had the same or similar problems.
by colliedogboy1
Sat Apr 25, 2020 3:34 pm
Forum: Mixers
Topic: XR684 pops,sizzles in one channel
Replies: 1
Views: 2397

Re: XR684 pops,sizzles in one channel

If the noise causes the EQ to light up, then it's coming from the mixer section of the unit. As for the cause, I don't know. Moisture inside, maybe?
by colliedogboy1
Fri Apr 24, 2020 9:26 pm
Forum: Microphones
Topic: Connecting VCM 3 to a computer
Replies: 2
Views: 7199

Re: Connecting VCM 3 to a computer

That mic requires phantom power which normally comes through a professional XLR (3-wires) connection. I have never seen that type of connector on a computer, so I am doubtful that you can connect your VCM3 to it.
by colliedogboy1
Fri Apr 24, 2020 9:16 pm
Forum: Mixers
Topic: Any way to mute speakers while still sending signal to USB 2.0
Replies: 1
Views: 2305

Re: Any way to mute speakers while still sending signal to USB 2.0

Simply disconnect the cables that are plugged into your mixer's main/auxiliary outputs. That will completely stop any sound from going to all your amps/equalizers/reverb units, etc. If you need SOME of your mains/auxiliary sound but at a reduced volume, you need only turn down the volume/sensitivity...
by colliedogboy1
Wed Apr 22, 2020 12:26 pm
Forum: Speakers/Enclosures
Topic: How to Connect Old PA System with Peavey SP-4
Replies: 1
Views: 3643

Re: How to Connect Old PA System with Peavey SP-4

I didn't find any photos attached, but regarding the SP4 speaker's four 1/4" inputs, you will want to use one "Full Range" input from a mono amp or from one side of a stereo amp. If you were a pro, you could use a crossover unit and run one side of a stereo amp INTO the "High" plug of the speaker an...
by colliedogboy1
Sun Apr 19, 2020 7:54 pm
Forum: Mixers
Topic: Help using usb 2.0 out on FX2
Replies: 2
Views: 2971

Re: Help using usb 2.0 out on FX2

This is speculation on my part but, I think the computer output is tied to the Main Outputs. Whatever signal you mix for the (L-R)mains will be the same mix coming out of the computer output. In short, I don't think you can connect your computer to the Aux outputs so you can get a separate mix. You ...