Search found 1098 matches

by Wooferhound
Tue Jan 12, 2021 4:21 pm
Forum: Speakers/Enclosures
Topic: 22 Series Diaphragm & Magnate Interchangeability
Replies: 4
Views: 630

Re: 22 Series Diaphragm & Magnate Interchangeability

The following Diaphragms are interchangeable . . .

22XT
22XT+
RX22
I have never seen a 22Ti
by Wooferhound
Mon Nov 09, 2020 9:37 am
Forum: Speakers/Enclosures
Topic: Rebuilding Four SP-2 Cabinets
Replies: 7
Views: 1766

Re: Rebuilding Four SP-2 Cabinets

I will use the matched SP-2Ti cabinets for smaller sound systems, or as part of a large system as Side Fill monitors or Near Field speakers on the Mains.
The 2 unmatched speakers would be best for for stage monitors for the drums or bass guitar. Could also be used as Delay speakers on the mains
by Wooferhound
Sat Nov 07, 2020 12:11 am
Forum: Speakers/Enclosures
Topic: Question about older BW 15" please
Replies: 2
Views: 821

Re: Question about older BW 15" please

I use a light coat of black semi-gloss on woofers all the time without any change in sound.
by Wooferhound
Mon Nov 02, 2020 10:07 am
Forum: Speakers/Enclosures
Topic: Newbie help with old hisys xt2 pa speakers
Replies: 4
Views: 1240

Re: Newbie help with old hisys xt2 pa speakers

Like This . . .

LikeThis.jpg
LikeThis.jpg (66.85 KiB) Viewed 1179 times
by Wooferhound
Fri Oct 30, 2020 9:33 am
Forum: Speakers/Enclosures
Topic: Newbie help with old hisys xt2 pa speakers
Replies: 4
Views: 1240

Re: Newbie help with old hisys xt2 pa speakers

That wiring is in fairly bad shape.
I'm seeing a simple Horn Protection Hi Pass filter on that circuit board.
The Woofer will connect directly to the incoming signal and the Tweeter will connect through this filter.
by Wooferhound
Wed Oct 28, 2020 12:23 pm
Forum: Speakers/Enclosures
Topic: Rebuilding Four SP-2 Cabinets
Replies: 7
Views: 1766

Rebuilding Four SP-2 Cabinets

I have just rebuilt 4 Peavey SP-2 cabinets. A club was going out of business and gave me a vanload of blown up Peavey gear and these 4 cabinets were part of the booty IMG_3219.JPG I always change out the jacks on the back panel from the old 1/4 inch to the newer Speakon twist lock connectors, these ...
by Wooferhound
Thu Aug 27, 2020 1:11 pm
Forum: Power Amplifiers
Topic: IPR Amps
Replies: 7
Views: 3681

Re: IPR Amps

I sent in an IPR2-2000 amplifier 10 days ago to have a Bad Channel repaired
Got a call today that, it was repaired, and the cost including shipping is $85
Too Cool ... Fast and Cheap . . .
by Wooferhound
Thu Aug 27, 2020 1:03 pm
Forum: Speakers/Enclosures
Topic: Peavey SP-1 Series lll
Replies: 11
Views: 2539

Re: Peavey SP-1 Series lll

rmlowz wrote:
Wed Aug 26, 2020 3:53 pm
the SP-1s They play maybe sound a little muffled
I would check the Horn Diaphragm first. They usually go out before the crossover does.
by Wooferhound
Thu Aug 27, 2020 12:51 pm
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 6459

Re: Building an Old School system based on DTH-1 and 415 Sub

If it was me I'd go 3 way. The 415's per side 45hz to 150hz if you want to push. The 2 10's in the DTH-1's 150hz up to the 1200hz to 1600hz range. The horns going from there. Then I'd but the 4 - 18 inch subs laid down in the center in front under the front lip of the stage ( or try beside the 415'...
by Wooferhound
Thu Aug 13, 2020 9:14 am
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 6459

Re: Building an Old School system based on DTH-1 and 415 Sub

Well it is a 4-Way system with 18 inch 15 inch 10 inch Horn So all the crossover points will scale up to properly distribute the power. When I rebuild 2 more of the 415's I may consider making a 3-way system out of it. The crossover I am using is a Peavey V4X analog . Priced some VSX digital x-overs...
by Wooferhound
Wed Aug 12, 2020 11:34 am
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 6459

Re: Building an Old School system based on DTH-1 and 415 Sub

Oh Yeah
I'm not afraid of using the Horn-EQ
just was not using it for testing to see what the speakers do raw
by Wooferhound
Wed Aug 12, 2020 8:01 am
Forum: Mixers
Topic: Connecting a Peavey 24FX Mixer via USB to computer
Replies: 7
Views: 5308

Re: Connecting a Peavey 24FX Mixer via USB to computer

Also I'm fairly sure that the mixer just shows up as a USB Device, not as a Peavey Mixer.
by Wooferhound
Wed Aug 12, 2020 7:39 am
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 6459

Re: Building an Old School system based on DTH-1 and 415 Sub

Sorry this has taken so long , been feeling slow for a coupla days. IMG_3100.JPG So this is half of the new Sound Rig that I'm working on. two SP-118's on the left with 4 ohm drivers, 415 cabinet in the center split into two 4 ohm loads, and the DTH-1 High/Mid on the right at 4 ohms for the mids and...
by Wooferhound
Sun Aug 09, 2020 6:04 pm
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 6459

Re: Building an Old School system based on DTH-1 and 415 Sub

The Pyle Pro you listed is 101 db's 1 watt input. http://www.pyleaudio.com/sku/PYM1578 Its listed as 400 watts rms. I'm guessing your wiring 2 pairs of the woofers in series and then the 2 in parallel for an 8 ohm cabinet load? Or are you running wiring the box for a 2 ohm load or 2 4 ohm loads? I'...
by Wooferhound
Sun Aug 09, 2020 5:16 pm
Forum: Speakers/Enclosures
Topic: Building an Old School system based on DTH-1 and 415 Sub
Replies: 28
Views: 6459

Re: Building an Old School system based on DTH-1 and 415 Sub

correction= project II mark III. with the ole cs amps . I actually have 2 FH-2 cabinets and 6 MF1-X horns, but not any MB mids at all, of course almost anything can be used as a Mid. Those Fh2 cabinets have a peak at 125hz that nothing else can touch. Highly efficient, but time alignment is a bitch...