Peavey Forum

Thanks Photo_G for cc#34 control, I had no time to check it deeply but it seems to work great. The most amazing feature of FCB1010 is that you can assign to every single patch different pedal expression parameters just to have the possibility to control almost everything in your Vypyr and you can al...

Yes!

The FCB unO Firmware sends a note on command when you depress the footswitch and a note off when released.

@ Photo_g U can use CC#7 instead of #37 to control the volume in 1.55 firmware. And about the midi language, I'm not an expert but for programming you need only the basic parameter: note on and off, control change and continuos controller with the right number and value. The number you're asking for...

Hi markcm, yes, the samp II has the ability to control the amount of pitch effect (rising or lowering the pitch), you can do it by switching the wah pedal. Question: when U move the pedal without enabiling the wah, what midi channel uses? It seems that cc#6 function only for wah. @ Photo_G. If I rem...

Hi and welcome Photo_G, First af all i've got to say sorry! I've discovered an error on the file i posted before :oops: , the loop control pedal was also programmed to change preset so I don't know if it's the reason why you can't reset the looper. I've tried and with a long press, about 1 sec., the...

This is the sysex with manual control of stomps and effects on Vypyr with explanation.

Thanks to Markcm and his amazing job with Samp 2 finally we've the midi code to control the effects on/off on Vypyr: note on/off # 12 control the manual mode (enable the possibility to switch on/off the effects) note on/off # 5 control stompbox on/off note on/off # 4 control effects on/off note on/o...

First of all thanks for doing this job of monitoring Samp2 mdi communications, I think this is the only way to deep understand our Vypyr possibilities. Talkin' about the firmware i've downgraded mine to 1.65 just to check if Peavey had implemented midi standard on it, but, trying cc#7, i discovered ...

Thanks Markcm, very good job! I will try the configuration late and let you know Just tried, it seems it doesn't work correctly, I can't switch on/off effects and the stomps row also change preset. Could you please give more information? Also I think the correct imput volume CC is #37, #20 seems to ...

My SanperaII has a pretty significant gap when channel swithcing; enough that I'd say it impacts it's usability for me. I do have an FCB1010 with the uno chip and would like to make time to try it more indepth. I use Ed Dixon's FCB1010 editor which isn't all that bad, although it's a lot more work ...

Footswitch commands (note on for press - 0x90 ## 0x7F, note off for release - 0x90 ## 0x00): #11 (0x0B) - Tap Tempo for the delay (note on only, off is ignored) #00 (0x00) - Looper record/play #02 (0x02) - Looper stop/hold reset #21 (0x15) - Tuner Enter / Exit (note on only, note off is ignored) __...

#8 will bypass the amps/no sound #9 will totally turn off the "effects", I can't get it to toggle on/off? I would really like to find the magic number that handles the stompbox :twisted: #8 selects amp model (value 0 to 12) I don't know how to switch between red and green #9 selects effects model (...